SWR Big Ben
Pre-Owned SWR Big Ben 1x18
Big Ben is an extremely fast, 1x18 subwoofer. It can be used as a stand-alone speaker enclosure, as part of a bi-amp system, or as the low end component for any large, multi-speaker bass rig. It’s a must-have for any true bottom dweller.
CONNECTION AND OPERATION
Big Ben can be connected to any musical instrument amplifier that is capable of driving an 8 ohm load. To connect your amplifier to Big Ben, run a high quality speaker cable (18 gauge or heavier) from your amplifier’s speaker output to one of the designated speaker inputs (Speakon on 1/4”) on Big Ben’s input panel.
The power output rating for any amplifier connected to Big Ben should not exceed the enclosure’s 400 watt RMS power handling capacity. Please be aware that exceeding Big Ben’s power handling capacity can void the SWR warranty if any damage occurs to the 18" woofer due to overpowering.
FULL RANGE INPUT AND OUTPUT JACKS
Big Ben features four, full range input/output jacks (two standard 1/4" and two Speakon) wired in parallel. If you are running two speaker enclosures in parallel, connect the speaker cable from your amplifier to either jack labeled “IN,” and a second speaker cable from either jack labeled “OUT” to the input of the second speaker enclosure.
Power Handling: 400 watts RMS
Impedance: 8 Ohms
Frequency Response and SPL: 100 dB SPL @ 2W1M
(–6dB @ 25 Hz and 3 kHz)
Speaker Complement: (1) 18" Woofer
Spring Loaded Rubber Grip Handles, Rear Circular Ports
Dimensions: 23"W x 30.5"H x 18.5"D
Weight: 73 lbs.